Radio Frequency / Dielectric Preheater Systems, Parts, and Service.

RF Preheaters.com

Remanufactured Model 67 Tall

Optional Equipment:

· IR Sensor

 

Also: This unit has a taller drawer opening of 12 inches in height and the maximum electrode spacing is 9 inches total.  The unit can be modified for a larger top electrode, of 18 x 24 inches.  Please note that for even heating you should allow for at least one-inch capacity between the upper electrode and the material you are heating, additionally you should maintain at least ˝ to 1 inch spacing from the material from the edge of the electrode.

 

Hence you can expect to accommodate preheating a product that is 8 inches thick, up to 16 x 22 inches in size.

Features –

Model 67 T

Power Output

12.5 Kilowatts

Preheating capability

Typical Resins

8 pounds

Per minute

Top Electrode Dimensions

18" x 24" (see below)

Top Electrode Spacing

             (Adjustable)

1"Minimum

9" Maximum

Power Tube

Type 6-3A

Operating Frequency

90 MHz Nominal

D.C. Power Supply

Solid state diodes, MOV protected

Maximum Power Required

 52Amps  @  230 volts

 26 Amps  @ 460 volts

Manual Hood

   N/A

Hood Safety Barrier

   N/A

Controls and Indicators

On / Off Toggle Switch

     Buttons

Start / Stop

     Light

RF ON

     Meter

Plate / Grid

     Timers

RF Timer          (0-2 minutes)

Delay Timer     (0-2 minutes)

Cabinet Dimensions (Approx)

Width 33"

Depth 27"

     Height

  73"

     Working Level

38"

Weight (Approx)

1000 Pounds